Canon MV4i Camcorder User Manual


 
82
E
Editing
REW
PLAY
FF
REC
PAUSE
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
A/V
INSERT
PAUSEREMOTE
SLOW
+ /
/
×2
REC PAUSE
(LINE-IN)
ON/
OFF
D.EFFECTS
REC SEARCH
MV4i and MV4i MC
The MV4i and MV4i MC are equipped with the DV Recording function. The
MV4i and MV4i MC are only available in certain areas.
Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
quality. The DV terminal is for both line-in and line-out, since a single DV
cable can handle data in both directions.
If a digital VCR is connected and an anomalous signal is sent from the
VCR, the images recorded on the tape may also be anomalous (although it
may not appear so on the TV image), or not recorded at all.
You are unable to dub tapes recorded with the copyright protective signal.
Side with arrow
Side with arrow
: Signal flow
1. Connect the camera and the other digital device.
Connect the Canon CV-150F DV cable (optional) with the sides of the
plugs marked with the arrows facing as shown above.
2. Prepare the other device.
Turn on the power and load a recorded cassette.
3. Turn the camera’s POWER dial to VCR and load a blank
cassette.
DV IN appears in the display.
Example dubbing to the camera
Preparations
#4_MV4/MV4 MC-i_E(80-97) 01/7/31 10:32 Page 82 (1,1)