Filter
Top Products
134
E
Additional
Information
Troubleshooting
Refer to this checklist first if you have any problems with your camcorder.
Possible explanations are given for each problem on the list — turn to the page
numbers in parentheses for more information.
Make sure that the camera is properly connected if you are using it with a TV or
VCR. Consult your dealer or service outlet if problems persist.
Recording/Playback
Cause and/or what to do about it
• The POWER dial is not set to the
appropriate mode ( 14, 23).
• The cassette is not loaded or is set for
erasure prevention ( 12-13).
• The cassette has reached the end.
•
The power source is not properly
connected, or the battery pack is
exhausted or not properly attached
( 9-11, 127).
• The function cannot be used in that
recording program ( 53).
• The camera was in record pause
mode for more than about 5 minutes
( 14, 103).
• The battery pack is exhausted
( 10-11, 127).
• The battery pack’s power is
exhausted. Recharge or change to a
new battery pack ( 10).
• The cassette is not loaded or is set for
erasure prevention ( 12-13).
• The cassette has reached the end.
• The POWER dial is not set to the
appropriate mode ( 14, 103).
• You are attempting to play back or
record copyright protected material
( 83).
• The video heads are badly
contaminated ( 131).
• The camera is on manual focus ( 72).
• The viewfinder lens needs adjusting
( 126).
• The lens is dirty ( 131).
Problem
? Nothing happens when I press the
buttons.
? The camera turned itself off.
? The cassette compartment
stopped mid-operation while
loading/unloading a cassette.
? The start/stop button doesn’t
work.
? There’s no picture in the display.
? There’s a blank blue screen in the
display.
? The camera won’t focus.
#6_MV4/MV4 MC-i_E(126-155) 01/7/31 10:37 Page 134 (1,1)