Filter
Top Products
98
E
Using a Memory Card
(MV4i MC only)
The camcorder can take, store and manage still images on 2 types of memory
cards: the SD (Secure Digital) Memory Card (supplied with the camcorder) or a
MultiMediaCard (commercially available). The SD Memory Card has the protect
switch to protect your recording from accidental erasure. The SD Memory Card
and the MultiMediaCard fit into the same slot.
You can do the following with a memory
card:
• Record still images ( 103)
• View still images 3 ways: Single
( 107
)
, Slide show ( 108), Index
screen ( 108)
• Select the quality of images recorded on
the card ( 99)
• Protect important images against accidental erasure ( 112)
• Print mark ( 113) and erase ( 115) still images
• Create interesting effects by combining images ( 117)
• Record a still image from a cassette ( 105)
• Copy multiple still images automatically to and from a cassette ( 120, 121)
You can use most of the camera’s functions when recording to a memory card,
such as the various recording programs ( 53), self-timer ( 67), shutter speed
( 70), white balance ( 73) and other manual adjustments. Available functions
are marked with a or icon.
2 While the camcorder is recording the still image, appears red* in the
display.
• While appears red in the display, do not remove the memory card or
disconnect the power source. Doing so could result in data damage.
2 While the camcorder is retrieving a still image, appears green* in the
display.
• While appears green in the display, do not remove the memory card.
Doing so could result in data damage.
* It appears white when in mirror mode and on the screen of a connected TV.
● If you use memory cards other than the supplied one, make sure to format
them with the camcorder.
<<<<
<<<<
>>>>
>>>>
CARD
PLAY
CARD
REC
Memory Card Introduction -MV4i MC only-
Terminals
Front
SD Memory Card SDC-8M
Back
Important
• Inserting or removing the memory card without first setting the POWER dial
to OFF can result in data damage.
• This camcorder uses only SD Memory Cards ( **) or MultiMediaCards.
You cannot use any other types of memory cards.
** logo is a trademark.
Protect
switch
#5_MV4/MV4 MC-i_E(98-125) 01/7/31 10:34 Page 98 (1,1)