Canon MV4i Camcorder User Manual


 
90
E
Editing
Do not connect/disconnect any cables to/from the camera when dubbing audio or
preparing to dub audio.
1. Locate the point where you want to start audio dubbing, then press
the PAUSE button.
You can use the playback buttons on the body of the camera or the special
playback functions on the wireless controller in the same way as in playback
mode.
The camera becomes set to playback pause mode.
2. Press AUDIO DUB.
AUDIO DUB. and appear on the display.
3. Press the PAUSE button.
Audio dubbing starts.
Direct your voice into the microphone.
changes to .
4. When you get to the point where you want to stop dubbing, press
the STOP button.
Audio dubbing stops and AUDIO DUB. disappears from the display.
The camera returns to stop mode.
You can also set zero set memory ( 79) at the place you want to stop
audio dubbing, then every time you return to that position, audio dubbing
will cancel.
If instead of pressing STOP you press PAUSE, the camera will return to the
playback pause mode.
REW
PLAY
FF
SEARCH
SELECT
ZERO SET
MEMORY
AUDIO
DUB.
STOP
PAUSE
SLOW
+ /
/
×2
O
FF
POWER
PLAY
P.SCAN
M
O
V
IE
REMOTE
Dubbing
PLAY
#4_MV4/MV4 MC-i_E(80-97) 01/7/31 10:32 Page 90 (1,1)