Filter
Top Products
List of Error Messages
3-7
Troubleshooting
3
# 701
Cause The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using - (numeric keys) on the control
panel, and try again.
# 703
Cause The hard disk is full, and no more images can be scanned.
Remedy 1 Wait a few moments, and try scanning again after other send jobs are complete.
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate normally, turn the
main power OFF, and then back ON again.
# 711
Cause The inbox memory is full.
Remedy Erase the unnecessary documents stored in the inbox.
# 712
Cause The maximum number of documents are already stored in the inbox.
Remedy Erase the unnecessary documents stored in the inbox.
# 749
Cause You could not execute the job because a service call message is being displayed.
Remedy Turn the main power OFF, wait for three or more seconds, and turn the main power back ON.
If the machine still does not work normally, turn the main power OFF, disconnect the
machine, and contact your local authorized Canon dealer.
# 816
Cause You cannot print because the set page limit total has been reached.
Remedy Contact your System Manager.