Filter
Top Products
38
Getting Ready Printing AppendicesOverview
Troubleshooting Tasks and Index
NextBack
Return to Cover Page
Use the following procedures to charge the battery.
1 Attach the battery to the printer.
2 Connect the power cord to the compact power adapter
and plug it in a power outlet. Connect the compact
power adapter connector to the printer.
While the battery is charging, the power button will light orange
and go out when the battery is charged. The battery will cease
charging if you turn on the printer during the process. When you
turn the printer off again, it will resume charging.
3 After the battery is charged, detach the connector of the
compact power adapter from the printer.
The battery is now ready to power the printer.
Theprinterwillautomaticallyturnoffwhenpoweredbythebatteryifthe
printerisnotusedforfiveminutesormore.
The printer power button will begin to blink orange when the battery
charge is low. In addition, a message may appear on a connected
camera’s LCD monitor or the printer’s LCD monitor. Recharge the
battery or exchange it for a fully charged one.
Charging the Battery
To a power outlet
Remaining Battery Charge