Filter
Top Products
Playback
Basic Functions
E
35
Adjusting the Volume
The camcorder plays the sound with the
built-in speaker. The volume will be
muted when you close the LCD panel.
1 Press .
2 Select ( ) [SYSTEM SETUP] and
press ( ).
3 Select ( ) [VOLUME] and press
().
4 Adjust ( ) the volume as desired
and press ( ).
To turn off the volume completely,
keep pressing ( ) until the volume
icon changes to .
5 Press to save the setting and
close the menu.
Viewing Still Images
1 Move the power switch to ON, then
slide it down towards MODE and
release it to set the camcorder in
PLAY mode.
The green PLAY indicator will turn on.
2 Move the / switch to the
(Still images) position.
3 If necessary, change the media for
the still images.
Refer to Selecting the Media for the
Still Images ( 32).
4 Use the multi selector ( ) to
move between images.
IMPORTANT
The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer (except for the sample images for the
Card Mix function).
- Images whose file names have been
changed.
Avoid the following actions while the disc/card
access display ( or ) appears on
screen, and when either the DISC access or
CARD access indicator is on or flashing. Failing
to do so may result in permanent data loss.
- Do not subject the camcorder to vibrations or
strong impacts.
( 13)
SYSTEM SETUP
VOLUME
MENU
( 27)
Speaker
MENU
MENU
( 13)