Filter
Top Products
94
Trouble?
Memory Card Operation
Printing
List of Messages
Problem Solution
Memory card cannot be
inserted.
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
24
Memory card cannot be
recorded.
Memory card is full. Erase still images to free some space or
replace the memory card.
67
Memory card was not initialized. Initialize the memory card. 70
The folder and file numbers have reached their maximum value.
Set [FILE NOS.] to [RESET] and insert a new memory card.
42
Memory card cannot be played
back.
Insert a memory card. 24
Set the camcorder to . 35
Make sure the memory card is selected as the media for still
images.
32
Image cannot be erased. Image is protected. Cancel the protection. 69
“ ” flashes in red. Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
persists.
70
Problem Solution
The printer is not operating
even though the camcorder
and printer are correctly
connected.
1. Set the camcorder to .
2. Disconnect and reconnect the USB cable.
3. Turn off the printer and turn it back on.
–
Message Explanation
SET THE TIME ZONE,
DATE AND TIME
You have not set the time zone, date and time. This message
appears each time you turn the power on until you set the time
zone, date and time.
28
CHANGE THE BATTERY
PACK
Battery pack is exhausted. Replace or charge the battery pack. 21
TEMPERATURE TOO
HIGH CANNOT RECORD
The camcorder has exceeded its operational temperature.
Disconnect the compact power adapter and remove the battery and
let the camcorder cool down before resuming use.
–
TEMPERATURE TOO
HIGH CANNOT REMOVE
DISC
CANNOT RECORD
CHECK THE DISC
There is a problem with the disc. Replace the disc. 25
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use.
102
The disc’s recording surface may be dirty or scratched. –