Filter
Top Products
Trouble?
97
Additional Information
E
Direct Print Related Messages
NOTES
About Canon PIXMA/SELPHY DS Printers:
If the printer’s error indicator flashes or an error message
appears on the printer’s operation panel, refer to the printer’s instruction manual.
Message Explanation
PAPER ERROR There is a problem with the paper. Wrong paper size is inserted or the ink
cannot be used with the selected paper.
Or, if the paper output tray is closed, open it to print.
NO PAPER Paper is not correctly inserted or there is no paper.
PAPER JAM The paper jammed during printing. Select [STOP] to cancel printing. After
removing the paper, set some paper again and retry printing.
INK ERROR There is a problem with the ink.
NO INK The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart
printing.
INK ABSORBER FULL Select [CONTINUE] to resume printing. Consult a Canon Service Center
(refer to the list included with the printer) to replace the ink absorber.
• FILE ERROR
• CANNOT PRINT!
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
COULD NOT PRINT X
IMAGES
You attempted to use the print order settings to print X images that were
recorded with another camcorder, with a different compression or were
edited on a computer.
SET PRINT ORDER No still image on the memory card has been marked with a print order.
PRINT ORDER ERROR You attempted to set more than 998 still images in the print order.
CANNOT TRIM You attempted to trim an image that was recorded with another camcorder.
READJUST TRIMMING You changed the print style after you set the trimming settings.
PRINTER ERROR Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the error still persists, refer to the printer’s instruction manual and
contact the appropriate customer support center or service center.
PRINT ERROR Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the button, check the print settings.
HARDWARE ERROR Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
COMMUNICATION
ERROR
The printer is experiencing a data transfer error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing using
the button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
CHECK PRINT SETTINGS The print setting cannot be used for printing with the button.