Filter
Top Products
Chapter 4 Viewfinder Screen Indications and Menus 59
Chapter 4 Viewfinder Screen Indications and Menus
Basic menu page 2
Basic menu page 3
This is displayed when the SET UP switch has been
set to FILE.
For details of this operation, see “Setup Files” (page 71).
Basic menu page 4
This menu is displayed only when an external sync
signal is input to the camera adaptor or VTR connected
to the camera head.
a) This applies when using an external sync signal to
synchronize operation of several cameras (see page
39).
Basic menu page 5
Item Settings
SKIN DTL
Sets the amount of
skin detail
correction.
0.0 (normal value) to 1.0
Smaller values set a softer skin detail.
LOW, STD (normal value), HIGH
Set the amount of DynaLatitude
effects as high level, standard level
(STD), or low level.
DL LEV
Sets the
DynaLatitude level.
PRE.WHT
Sets the color
temperature of the
preset white
balance.
When the FILTER control is set to 1
(3200K): 2200 to 3200 (normal value)
to 4300
When the FILTER control is set to 2
(5600K +
1
/8 ND), 3 (5600K) or 4
(5600K +
1
/64 ND): 4600 to 5600
(normal value) to 12000
Item Settings
SC PHASE
Sub carrier phase
adjustment for
when camera is
genlocked.
a)
000 (normal value) to 999
H PHASE
Horizontal phase
adjustment for
when camera is
genlocked.
a)
000 to 135 (normal value) to 199