Filter
Top Products
Chapter 4 Viewfinder Screen Indications and Menus 71
Chapter 4 Viewfinder Screen Indications and Menus
Setup Files
You can use setup files to reproduce a particular
configuration of settings. You can also revise the
contents of setup files.
There are eight types of setup files, of which five are
factory preset setup files and the other three are user
files.
Calling up a Setup File
This describes how to call up a setup file and use it to
replace the current menu settings.
1 Set the SET UP switch to FILE.
The camera head is set according to the currently-
selected file data.
2 Access basic menu page 3.
a)An asterisk (*) appears in front of any factory
preset file whose contents have been revised at
least once.
SET UP switch
Current file
a)
Selected file
3 Move the cursor to SELECT FILE and use the UP/
ON button or the DOWN/OFF button to select the
desired file.
Press the UP/ON button or DOWN/OFF button
repeatedly until the desired file name is displayed.
4 Move the cursor to CHG FILE and press the UP/
ON button.
The display changes as shown below and the
selected file is called up.
You can also call up these files via a similar operation
in advanced menu page 10. In this page, a file
recorded onto a tape can also be called up (when using
the DSR-1/1P).
For details, see “To call up files recorded onto a tape (when
using the DSR-1/1P)” (page 72).
USER1 to USER3 User setup files (set to STD at
shipping)
File
Description
STD
Settings for shooting under
standard conditions
HI SAT Settings for making pictures
vivid
FL Settings for shooting under
fluorescent lighting
FILMLIKE Settings for making pictures like
ones shot by film camera
Settings to optimize camera
image for recording and
playback characteristics of S-
VHS, VHS, or Hi-8 tape
SVHS/VHS