Filter
Top Products
Chapter 4 Viewfinder Screen Indications and Menus 67
Chapter 4 Viewfinder Screen Indications and Menus
a) When the viewfinder’s DISPLAY switch is set to OFF,
indications related to these items are not displayed even
when menu settings are set to ON.
To set the camera ID
1 Press the MENU/STATUS switch to move the
cursor to ID SET.
The cursor (→) changes to the text entry arrow (↓).
2 Press the MENU/STATUS switch to move the text
entry arrow.
Press the MENU/STATUS switch upward to move
the cursor to the right or downward to move it to
the left.
3 Press the UP/ON button or DOWN/OFF button to
enter the desired characters.
The displayed character changes each time the UP/
ON button is pressed. It changes in reverse order
each time the DOWN/OFF button is pressed.
4 Return to step 2 and repeat the text entry
procedure.
TC IND
a)
Selects whether or not to
show the time data indication
on the normal indications
(valid only when the DSR-1/
1P or PVV-3/3P is
connected).
ON (normal value):
Displays.
OFF: Not display.
ID IND
Selects whether or not to
display the camera ID when
displaying color bars.
ON (normal value):
Displays.
OFF: Not display.
ID SET
Sets the camera ID (up to
eight characters, including
alphanumerics, symbols,
and spaces).
See “To set the camera ID”
below.
Item Settings
Current camera ID
5 When you have finished entering the text, move
the cursor to the parenthesis position.
This clears the displayed menu and returns to the
normal indications.
Advanced menu page 7
a) At shipping, the EZ MODE is set to STD.
Item
Settings
EZ MODE
When the EZ MODE button
has been set to EZ mode
ON, this selects whether or
not to change the settings of
other switches and menus to
the standard settings. (The
EZ mode function cannot be
used during remote
operation.)
STD (normal value):
Changes settings to
standard settings.
CUSTOM: Changes only
some settings to standard
settings.
For details of the settings
when STD or CUSTOM is
specified, see “EZ mode
settings” on next page.
A.IRIS-AGC
Selects auto iris adjustment
which sets an F-stop value
that can be switched to AGC
(displayed only when the EZ
MODE is set to CUSTOM).
F1.8, F 2.8 (normal value),
F4, F5.6
A.IRIS-AE
Selects auto iris adjustment
which sets an F-stop value
that can be switched to AE
(displayed only when the EZ
MODE is set to CUSTOM).
F5.6 , F8, F11, F16 (normal
value)
0 dB, 3 dB, 6 dB, 9 dB, 12
dB (normal value)
AGC LIMIT
Sets an upper limit value for
AGC adjustment (displayed
only when the EZ MODE is
set to CUSTOM).