Filter
Top Products
Changing Shooting Functions
124
Changing the Image Stabilization (IS Mode)
● Select [IS Mode], then press the qr buttons to
select a setting.
● [Continuous]: The image stabilization is
always on. You can confirm the result directly
on the screen which makes it easier to check
the composition or focus of the subject.
[Shoot Only]: The image stabilization is only
on in the moment of shooting.
[Panning]: The image stabilization only works
for the effect of up and down motion. This
option is recommended for shooting objects
moving horizontally.
Registering Functions to the c Button
● Select [Set c button], then press the m
button.
● Press the opqr buttons to select the
functions to register, then press the m button.
● When you press the c button, you can use
the registered function or display the setting
screen for the selected function.
• If camera shake is too strong, fix the camera to a tripod. When you
attach the camera to a tripod, you are recommended to set [IS Mode] to
[Off] to shoot.
• When using [Panning], make sure to hold the camera horizontally. The
Image Stabilization does not work when the camera is held vertically.
• Select if you want to cancel a function.
• When this symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode.
• In , each press of the c button records white balance data (p. 73),
and the white balance settings also change to .
(EC255) CDP-E065_Guide_E.book Page 124 Friday, July 4, 2008 10:35 AM
COPY