Canon E1 Digital Camera User Manual


 
83
You can select a chosen face to focus on and then shoot.
Set the Face Select mode.
Point the camera towards the face and
press the
0 button.
XThe Face Select mode will activate and a
white face frame ( ) will display around
the face the camera will focus on. Even if
the subject moves, the frame will follow
the subject within a certain range.
Select a face you wish to focus on.
Press the 0 button, and a face frame will
move to the face you wish to focus on. If
the frame has moved to all detected faces,
the Face Select mode will be canceled.
Holding down the 0 button will display
face frames (up to 35) of all the detected
faces (green: the face the camera will
focus on, white: detected faces).
Shoot.
Press the shutter button halfway. The face
frame of the focused face will change into
and appears in green.
Press the shutter button all the way to shoot.
0 Selecting the Face to Focus On
(Face Select and Track)
Face Frame
In the following cases, the Face Select mode will be canceled.
When turning the power off and back on or changing the shooting mode.
When displaying the Menu screen.
When using the digital zoom or digital tele-converter.
When changing the recording pixels to .
When the screen is turned off (p. 45).
When the camera cannot detect any face.
(EC255) CDP-E065_Guide_E.book Page 83 Friday, July 4, 2008 10:35 AM
COPY