Filter
Top Products
Safety Precautions
85
Appendix
Battery (SELPHY ES2 only)
Do not handle the power cord if your hands are wet.
CAUTIONS
Do not stick any part of your hand into the printer interior.
Do not use or store the equipment in the following types of places.
Humid or dusty areas, places subject to heavy vibrations, places near flames, places subject to
strong sunlight, or hot places such as an automobile trunk or dashboard.
Do not attach metallic pins or allow dirt to collect on the power plug or recharging
connectors.
Do not excessively pull or bend the power cord.
Do not use the compact power adapter for any other equipment except this printer, use it
beyond its rated capacity or voltage, or leave the plug partially inserted into a power outlet.
Do not open the cartridge cover during printing.
• If you do so, printing will stop.
• Paper moves back and forth in the printer during printing. Placing your hand in the way of the
moving paper may result in injury.
Unplug the equipment when you are not using it.
Leaving the equipment plugged in during prolonged periods of non-use poses risk of electric
shock or fire.
WARNING
Do not place the battery pack near a heat source or expose it to direct flame or heat.
The battery pack should not be immersed in water.
Do not attempt to disassemble, alter or apply heat to the battery pack.
Avoid dropping or subjecting the battery pack to severe impacts that could damage the
casing.
Use only recommended battery pack and accessories.
There is a risk of the battery exploding or leaking. In the event that a battery leaks and the eyes,
mouth, skin or clothing contact these leaked substances, immediately flush with water.
When you are not using the printer, remove the battery and store it properly.