Canon FS200 Camcorder User Manual


 
19
supplied compact power adapter to
voltage converters for overseas travels
or special power sources such as those
on aircraft and ships, DC-AC inverters,
etc.
NOTES
Turn off the camcorder before charging
the battery pack. The battery pack will
not charge while the camcorder is on.
If remaining battery time is an issue, you
can power the camcorder using the
compact power adapter so the battery
pack will not be consumed.
Charged battery packs continue to
discharge naturally. Therefore, charge
them on the day of use, or the day
before, to ensure a full charge.
We recommend that you prepare battery
packs to last 2 to 3 times longer than
you think you might need.
Preparing the Wireless Controller
( only) and Accessories
First, insert the supplied lithium button
battery CR2025 into the wireless
controller.
1 Press the tab in the direction of
the arrow and pull out the battery
holder.
2 Place the lithium button battery
with the + side facing up.
3 Insert the battery holder.
Point the wireless controller at the
camcorder’s remote sensor when
you press the buttons.
You can rotate the LCD panel 180
degrees to use the wireless controller
from the front of the camcorder.
NOTES
The wireless controller may not work
properly when the remote sensor is
situated under strong light sources or
direct sunlight.
If the wireless controller does not work,
check that [WL.REMOTE] is not set to
[ OFF ] ( 87). Otherwise,
replace the battery.
Tab
TO USE THE WIRELESS CONTROLLER
COPY