Filter
Top Products
Video
46
camcorder ( 45) and transfer the
files again.
Pre-recording Function
The camcorder will start recording 3
seconds before you press ,
ensuring you do not miss important
shooting opportunities. This is
especially useful when it is difficult to
predict when to start recording.
1 Push the joystick ( ) to display
the joystick guide.
2 Select ( ) [Pre REC ] and
press .
• appears.
• Press again to turn pre-
recording off.
3 Press to begin recording.
The recording will include the 3
seconds before was
pressed.
NOTES
• While pre-recording is on, all operational
sounds will be turned off.
• The camcorder will not record the full
3 seconds if any of the following
operations are not performed before
3 seconds have elapsed.
- Turning on pre-recording
- Exiting standby mode
- Stopping a recording
• Pre-recording will be turned off when
any of the following operations are
performed.
- Opening the FUNC. menu or setup
menus
- Leaving the camcorder without any
operation for 5 minutes
- Changing the operating mode
- Turning on Video Snapshot
- Setting the camcorder to standby
mode
Self Timer
[ MENU]
[ CAMERA SETUP]
[SELF TIMER] [ON ]
appears.
mode:
In record pause mode, press
.
The camcorder starts recording after a
10-second countdown*. The
countdown appears on the screen.
mode:
Press , first halfway to
activate the autofocus and then fully.
The camcorder will record the photo
after a 10-second countdown*. The
countdown appears on the screen.
( 23)
Start/Stop
Start/Stop
Start/Stop
( 23)
FUNC.
FUNC.
Start/Stop
PHOTO
COPY