Filter
Top Products
External Connections
76
4 Press the start button on the DVD
burner.
• A progress bar will be displayed on
the screen.
• After pressing the start button
(while the current disc is being
written) the operation cannot be
canceled.
• When the disc (or the last disc, if
the data requires multiple discs) is
finalized, [TASK COMPLETED] will
be displayed. Take out the disc
and close the disc tray.
After a disc is finalized it will be ejected
automatically and [INSERT A NEW/
BLANK DISC AND CLOSE THE DISC
TRAY] will appear. Insert the next disc
and close the disc tray.
After the operation is finished, [INSERT
A NEW/BLANK DISC] will be displayed
again. Insert a brand new disc and
close the disc tray.
Discs created with this camcorder and
the DVD burner can be played back on
DVD players and computers that meet
the following requirements:
• Compatible with the discs you
created (DVD-R/DVD-R DL/DVD-RW
discs)
• Compatible with DVD-Video
specifications
• DVD playback software that is
installed and running (in the case of
computers)
Refer to the instruction manual of the
external device and make sure it is
compatible.
IMPORTANT
• While the camcorder is connected to the
DVD burner, do not open the memory
card slot cover and do not remove the
memory card.
• Observe the following precautions while
the ACCESS indicator on the camcorder
is on or flashing. Failing to do so may
result in permanent data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source
or turn off the camcorder or the DVD
burner.
• When creating discs with the optional
DW-100 DVD Burner, you cannot add,
using the [PLAYLIST] option, scenes
recorded while the pre-recording
function was on or divided scenes. To
add such scenes, use the [ALL
SCENES] or [REM.SCENES] option.
• For important information on handling
your discs, refer to Cautions
on handling.
NOTES
• The FUNC. menu and setup menus
cannot be accessed while the
camcorder is connected to the DVD
burner.
• Disconnect the USB cable before
changing the operating mode.
• The amount of time required for step 2
depends on how many scenes are being
included on a disc. We recommend
keeping the number of scenes to 2000
WHEN THE DATA REQUIRES MULTIPLE DISCS
TO CREATE AN ADDITIONAL COPY OF THE
SAME DISC
TO PLAY BACK A DVD DISC
COPY