Filter
Top Products
99
Messages Related to the Optional DW-100 DVD Burner
If a message appears while the camcorder is connected to the optional DW-100 DVD
Burner, refer to the following section and also to the instruction manual of the DVD
Burner.
CANNOT READ THE DISC CHECK THE DISC
- During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc
containing movies, software, etc.) or an 8 cm mini DVD disc is inserted.
CLOSE THE MEMORY CARD SLOT COVER
- The memory card slot cover is open. Close the cover after correctly inserting the memory card ( 28).
CONNECT THE COMPACT POWER ADAPTER
- The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
DISC ACCESS FAILURE CHECK THE DISC
- There was an error when reading the disc or attempting to write onto it.
- This message can also appear if condensation has formed. Wait until the DVD burner dries completely before
resuming use ( 105).
- The disc may not be loaded correctly. Try removing the disc and reinserting it.
ERROR READING THE DATA
- Error while reading the recordings from the camcorder.
- Check that the USB cable was not accidentally disconnected.
LOADING THE DISC
- Reading data from the disc.
NO DISC
- Insert a disc into the DVD burner.
- This message can also appear if condensation has formed. Wait until the DVD burner dries completely before
resuming use ( 105).
NO PHOTOS
- There are no photos to add to the disc.
NO SCENES
- There are no movies to add to the disc.
NO SCENES LEFT TO ADD
- You selected to create a DVD with the [REM.SCENES] setting, but all the scenes have already been added to
discs created in the past; there are no applicable scenes.
NO TRANSFER ORDERS
- You selected to create a DVD with the [TRANS.ORD] setting, but no photos have been marked with transfer
orders ( 80).
OPERATION CANCELED
- The USB cable was disconnected and the operation was canceled. Check the USB connection.
UNABLE TO RECOVER DATA
- Could not recover a corrupted file.
COPY