Canon HF M400 Camcorder User Manual


 
Video 119
•[B Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [
E PF24]).
Dividing Scenes
You can divide scenes in order to leave out the best parts and later cut
out the rest.
1 Play back the scene you want to divide.
2 Pause the playback at the point where you want to divide the
scene.
3 Open the scene division screen.
4 Bring the scene to a precise point, if necessary.
Playback controls will appear on the screen (0 57). Use any special
playback modes (fast playback, frame reverse/advance) as necessary
to locate the desired point.
5 Divide the scene.
The video from the division point to the end of the scene will appear
as a new scene in the index screen.
NOTES
When advancing/reversing frames while dividing the scenes, the interval
between frames is about 0.5 seconds.
Operating modes:
[Edit] 8 [Divide]
[A Divide] 8 [Yes]
COPY