Filter
Top Products
134 External Connections
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• When copying photos onto an Eye-Fi card in memory card slot Y, pho-
tos will be uploaded automatically if you are within the range of a config-
ured network. Always verify that Eye-Fi cards have been approved in
the country/region of use. See also
Using an Eye-Fi card
(0 144).
NOTES
• In the following cases, you will not be able to copy recordings to the
memory card:
- If the double memory card slot is open.
- If the LOCK switch on memory card Y is set to prevent writing.
- If there is no memory card in memory card slot Y.
• Scenes that were edited using the supplied software VideoBrowser
and were then transferred back to the camcorder cannot be copied to
the memory card.
• If there is not enough space on memory card Y, as many photos as
possible will be copied before stopping the operation.
Saving Recordings on a Computer
Movies recorded with this camcorder are saved in the built-in memory
( only) or on a memory card. Because space is limited, make
sure to save your recordings on a computer on a regular basis.
Saving Movies (Windows only)
With the supplied software Transfer Utility or VideoBrowser you can
save to your computer the scenes you have recorded. Additionally, the
supplied software VideoBrowser offers many options for organizing
your video library, editing video, creating discs and more.
COPY