Canon HF M400 Camcorder User Manual


 
Video 85
Be sure to save your recordings regularly (0 131), especially after
making important recordings. Canon shall not be liable for any loss or
corruption of data.
Photos recorded on an Eye-Fi card in memory card slot Y will be
uploaded automatically after setting the camcorder to playback mode, if
you are within the range of a configured network. Always verify that Eye-
Fi cards have been approved in the country/region of use. See also
Using an Eye-Fi card
(0 144).
NOTES
The zoom, Quick Start function, power saving modes, etc. operate the
same way in mode as in mode. For details, refer to
AUTO
Mode
(0 46).
Photos cannot be recorded while the digital zoom is activated or while
fading in or fading out a scene.
Reviewing the Latest Scene Recorded
You can review the last 4 seconds of the last scene recorded with the
camcorder without switching to playback mode. While reviewing the
latest scene, the picture will be played back without sound.
1 Set the mode switch to y or .
2 Review the last 4 seconds of the scene.
Selecting the Video Quality (Recording Mode)
The camcorder offers 5 recording modes. Changing the recording
mode will change the recording time available on the memory. Select
MXP or FXP mode for better movie quality; select LP mode for longer
recording times. The following table gives approximate recording
times.
Operating modes:
[FUNC.] 8 [ Review Recording]
Operating modes:
COPY