Filter
Top Products
178 Additional Information
To record video on this memory card, it is recommended to use only the XP+/SP/LP recording
modes
- Movies may not be recorded correctly on this memory card if the recording mode is set to
MXP or FXP mode (0 85).
To use the wireless function, insert the Eye-Fi card into slot B.
- You may have inserted the Eye-Fi card into memory card slot X. Insert it into memory card
slot Y.
Too many photos. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
on the memory card to fewer than 2,500 photos (Windows), or 1,000 photos (Mac OS).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Total play time is too long
- When converting scenes from a story, the maximum total playback time of the scenes to be
converted is 2 hours and 30 minutes. Reduce the number of scenes to be converted to SD.
Unable to recognize the data
- You transferred data to the camcorder recorded using a video configuration that is not sup-
ported (PAL or SECAM). Play back the recordings with the device originally used to record
them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (0 134) and initialize the memory
using the [Complete Initialization] option (0 44).
Unsupported gallery data detected. Cannot record or edit. Delete gallery data?
- The gallery data of the movies in the selected memory card is not supported. The movies can
be played back but you cannot edit them or record additional scenes to this gallery. Select
[Yes] to delete the unsupported gallery data. Note that after doing so, you will not be able to
play back the movies with the device originally used to record the unsupported gallery data.
COPY