Filter
Top Products
External Connections 145
NOTES
• Depending on the amount of data to be uploaded and the network’s
wireless connection conditions, it can take some time to upload video
files. If the wireless connection is too weak, the wireless upload may fail
and the video files will be registered as incomplete uploads.
• About power saving:
- Wireless communication drains the power of the battery pack faster
than usual. We recommend powering the camcorder using the
compact power adapter.
- While files are being uploaded wirelessly, the camcorder’s automatic
power off function will be disabled.
• Wirelessly uploading files is not possible when the Eye-Fi card is in
memory card slot X (the Eye-Fi icon will not appear on the screen). Be
sure to insert the Eye-Fi card into memory card slot Y.
• While using an Eye-Fi Card, the ACCESS indicator may flash from time
to time.
• Wireless communication is available only in playback mode. Any wire-
less transfer in progress will be stopped if you set the camcorder to
recording mode.
• Wireless communication is not available when the optional WM-V1
Wireless Microphone is attached to the camcorder. Any wireless trans-
fer in progress will be stopped the moment you attach the WM-V1 to
the camcorder.
• You can turn off the wireless communication with the 6 8 [Eye-Fi
Communication]* setting.
• If the LOCK switch on the Eye-Fi card is set to prevent writing, you will
not be able to turn the wireless communication on/off and the status
icon will change to o. To use wireless communication make sure the
switch on the Eye-Fi card is not in the LOCK position.
* This menu option will appear only when using an Eye-Fi card.
COPY