Canon HV20 Camcorder User Manual


 
Other Functions
60
Self Timer
POINTS TO CHECK
: Set the camcorder in record
pause mode.
appears.
:
Press .
The camcorder starts recording after a
10-second countdown*. The countdown
appears on the screen.
:
Press , first halfway to activate
the autofocus and then fully to record
the still image.
The camcorder will record the still image
after a 10-second countdown*. The
countdown appears on the screen.
*2 seconds when using the wireless
controller.
NOTES
Once the countdown has begun, you can
cancel the self timer by turning off the
camcorder.
Audio Recording Level
You can adjust the audio recording level
for the built-in or for an external
microphone. You can display the audio
level indicator while recording or playing
back the tape.
Manual Adjustment of the Audio Recording
Level
POINTS TO CHECK
Mode switch:
1 If the joystick guide does not appear
on screen, press ( ) to display it.
2 Push the joystick ( ) toward
[MIC].
If [ MIC] does not appear on the
joystick guide, repeatedly push the
joystick ( ) toward [NEXT] to display
the joystick guide in the illustration
above.
The manual adjustment icon will
appear to the left of the audio level
indicator and the manual adjustment
bar (green) will appear below it.
(10)
FUNC.
( 23)
MENU
CAMERA SETUP
SELF TIMER
ON
FUNC.
FUNC.
START/STOP
PHOTO
( 10)
Audio level indicator
Audio level adjustment bar
Manual audio level adjustment