Filter
Top Products
Connecting to a Printer
External Connections
83
: The image selection screen
appears.
F
ROM THE IMAGE SELECTION SCREEN
1 Select ( ) the still image you
want to mark with a print order.
2 Press ( ) to set the print order.
The number of copies appears in
orange in the box next to the print
order symbol .
3 Set ( ) the number of copies
desired and press ( ).
To cancel the print order, set ( ) the
number of copies to 0.
4 Repeat steps 1-3 to mark additional
images with print orders or press
twice to close the menu.
Printing the Still Images Marked with Print
Orders
1 Connect the camcorder to the
printer using the USB connection –
connection type ( 75)– shown
in the previous section PC
Connection Diagrams.
2 Press , select ( ) the
icon and press ( ) to open the
setup menus.
3 Select ( ) [ PRINT] and press
().
• The print setting menu appears.
• The error message “SET PRINT
ORDER” appears if you connect a
printer with direct print function and
select [ PRINT] without having set
any print orders beforehand.
4 Make sure that [PRINT] is selected
and press ( ).
Printing starts. The print setting menu
disappears when the printing is
completed.
NOTES
Depending on the connected printer, you can
change some print settings before step 4
(80).
Cancel Printing/Printing Errors
( 81)
Restarting Printing:
Open the print settings
menu as explained in steps 2-3 above. In the
print settings menu, select [RESUME] and
press ( ). The remaining images will be
printed.
Printing cannot be restarted when the print
order settings have been changed or if you
deleted a still image with print order settings.
Erasing All Print Orders
FUNC.
( 23)
PRINT ORDER
Press ( )
PRINT
FUNC.
( 23)
FUNC.
FUNC.
1
FUNC.
( 10)
FUNC.
(23)
MENU
CARD OPERATIONS
PRINT ORD.ALL ERASE
YES
FUNC.
FUNC.