Canon VB150 Security Camera User Manual


 
When a new version of the firmware is released, the firmware can be upgraded remotely. To
upgrade remotely, use the “vb150rfu.exe” program on the CD-ROM and the new firmware.
2
1
Obtain the new firmware.
Launch the “vb150rfu.exe” program on the enclosed CD-ROM and
use the procedure below to perform the remote upgrade.
1 Enter the IP address, user name and password.
2 The current version is displayed.
Server Address: Camera server IP address ( P.38)
HTTP Port : The HTTP port No. of the camera server ( P.57)
Administrator Name: Server administrator user name ( P.37)
Administrator Password: Server administrator password ( P.37)
4 Store the transferred firmware in
flash ROM.
3 Specify the firmware file to be transferred to the server.
5 The completion window appears.
Visit the following Web site (URL:http://www.canon.com/webview) for the latest
information on new firmware.
c
Note
Do not turn the VB150 off until the completion window appears. Turning the
VB150 off before the completion window appears may prevent the VB150
from starting up properly.
When upgrading from Ver. 1.0 to Ver. 1.1, please follow the instructions as
specified on the following Canon website:
http://www.canon.com/webview
Upgrading the Firmware Remotely
111