Filter
Top Products
Common Setting
“Restrict Camera Control to Presets”
Camera control by using the Viewer for
PC and the Viewer for Java can be
restricted to the preset angles specified in
Preset 1-8.
Presets 1-8
Up to 8 presets can be specified.
“Application”
Use these options to specify whether this
preset can be used only for picture
recording (→ P.48) or is also made
available in the viewers. If it is also
provided in the viewers, always specify
the preset name.
“Preset Name”
Enter a name consisting of up to 15
alphanumeric characters.
“Camera”
Selects the camera for which the preset
position is set.
“Camera Parameter”
Use this to set the video capture settings
to be provided.
“Pan”
Sets the pan position of the camera.
“Tilt”
Sets the tilt position of the camera.
“Zoom”
Sets the value for the camera’s angle of
zoom.
“Brightness”
Sets the target value for the camera’s
auto exposure feature. Select “Brighter”
if the picture is too dark due to backlight
or other factors.
Preset Settings Page
Use this page to specify the settings for preset camera positions provided to users.
Using the VB Administration Tools is a convenient way to set presets (→ P.77).
Click the [OK] button to change the settings. To discard the changes, click the
[Cancel] button. This returns you to the settings title page.
e
Tip
● Presets can be set visually and more
easily from the VB Administration Tools.
Please use the VB Administration Tools
for the settings (→ P.77).
● If “Restrict Camera Control to Presets” is
selected, the presets can be displayed alone
without displaying the camera control GUI on
the Viewer for Java (→dGuide to Creating
Web Pages for Video Distribution P.9).
c
Note
Changes in the preset settings are not
applied to the viewer while it is
connected.
47