Filter
Top Products
Displaying Connection Information
Connection information during connection with the VB150 can be displayed.
Reconnecting
Reconnections are made when a connection with the VB150 has been cut.
To make a reconnection, choose Reconnect from
the File menu.
Choose Connect Information from the Server menu
and a dialog box showing the connection information
appears.
The IP address that was set in the VB150 is
displayed in the “Host name” (→ P.38). The “Video
Transmission Port” and the “Camera Control Port”
that were set on page 56 and the “HTTP port” that
was set on page 57 are all displayed.
Panorama Creation Tool
Opening/Saving Pictures
Panorama pictures can be retrieved from picture files or saved as picture files.
To retrieve a picture file and use it for a panorama
picture, choose Open from the File menu. When the
dialog box appears, select the picture file you want
to use.
To save a captured panorama picture as a picture
file, choose Save from the File menu. When the
dialog box appears, select the folder where the file is
to be saved and enter the file name.
In both cases, only the JPEG format is supported.
c
Note
● Panorama pictures must be updated when the location where the VC-C50i/
VC-C50iR/VC-C4/VC-C4R/NU-700 is placed has been changed or when the
model has been changed (from a VC-C4 to a VC-C4R, for instance).
● While the Panorama Creation Tool is starting up, the video capture size (→
P.42) automatically becomes 160 x 120. It returns to the original specified
size when you exit this tool.
71