Filter
Top Products
3-7
Setup Procedures
Detail Settings
2. Enter the user name and password.
You are now asked for your user name and password. In the factory default settings, the
user name is “root” and the password is “VB-C10” for both the VB-C10 and VB-C10R.
Enter these settings.
* The password can be changed at any time on the System/Network settings page (→ P.3-9).
Note
This manual uses the IP address 192.168.100.1 (the factory default setting) below as
an example to describe the detail settings. Please enter the actual IP address that is
set in your VB-C10/VB-C10R.
Accessing the Settings Title Page
The various settings on the VB-C10/VB-C10R are specified by using a browser to access Web
pages on the VB-C10/VB-C10R. You begin by accessing the Settings Title Page.
Settings Title Page
1. Use the browser to access http://192.168.100.1/admin.
Use the IP address specified in “Initial Setup” (→ P.3-3).