Canon XC10 Camcorder User Manual


 
137
Menu Options
Menus
Table of Contents Index
[3 Recording Setup] menu
[Photo Review Time]: Selects the time to display a photo after it is recorded.
[Available Space in Memory]/[Used Space in Memory]: Displays a screen where you can verify how much of the
recording media is currently available for recording or how much is in use (the recording media icon shows the
total recording time and ª shows the total number of photos).
Estimated figures about available clip recording time and available number of photos are approximate and
based on the bit rate and photo size currently in use.
You can also check the SD card’s speed class.
[File Numbering]: Photos are automatically assigned consecutive numbers and stored on the SD card in folders.
You can select the file numbering method to be used. We recommend using the [n Continuous] setting.
[m Reset]: File numbers will restart from 100-0001 every time you insert a new SD card. If an SD card
already contains previous recordings, file numbers will continue from the number following that of the last file
on the SD card.
[n Continuous]: File numbers will continue from the number following that of the last photo recorded with
the camcorder. This setting is the most convenient for managing files on a computer.
Menu item Setting options v { y } A
[4K / HD] [4K 4K Clips], [HD HD Clips] Ü 51
[4K Recording] [ 29.97P / 305 Mbps], [ 29.97P / 205 Mbps],
[ 23.98P / 305 Mbps], [ 23.98P / 205 Mbps]
Ü 51
[HD Recording] [ 59.94P / 50 Mbps], [ 59.94i / 35 Mbps],
[ 29.97P / 35 Mbps], [ 23.98P / 35 Mbps]
Ü 51
[Slow & Fast Motion] [OFF Normal Recording], [x1/4], [x1/2], [x2], [x4], [x10], [x20], [x60],
[x120], [x1200]
Ü 91
[Photo Aspect Ratio] [ 4:3 4000x3000], [ 3:2 4000x2664], [ 16:9 3840x2160],
[ 4:3 640x480]
Ü 43
[Interval Recording] [j Off], [ 5 sec], [G 10 sec], [ 30 sec], [ 1 min],
[ 10 min]
Ü 93
[Photo Review Time] [j Off], [C 2 sec], [D 4 sec], [E 6 sec], [F 8 sec],
[G 10 sec]
Ü
[Detect Orientation] [i On], [j Off] Ü 95
[Available Space in
Memory]
[], [8]
Ü Ü
[Used Space in
Memory]
[], [8]
Ü Ü
[Initialize /8] [ Memory Card], [8 Memory Card] Ü Ü Ü Ü 36
[Time Code Mode] [ Preset], [ Regen.] Ü 78
[Time Code Running
Mode]
[ Rec Run], [ Free Run]
Ü 78
[DF/NDF] [ DF], [ NDF] Ü 79
[Initial Time Code] [00:00:00.00] to [23:59:59.29] ([00:00:00.00]), [Reset] Ü 79
[User Bit Output Mode] [ Fixed], [ Pulldown] Ü 80
[User Bit Type] [ Setting], [ Time], [ Date] Ü 80
[Color Bars] [j Off], [ SMPTE], [ ARIB] Ü 88
[1 kHz Tone] [ü -12 dB], [þ -18 dB], [ÿ -20 dB], [j Off] Ü 88
[File Numbering] [m Reset], [n Continuous] Ü Ü Ü Ü