Canon XC10 Camcorder User Manual


 
75
Adjusting the Focus
Menus
Table of Contents Index
NOTES
The camcorder may mistakenly detect the faces of non-human subjects. In such case, turn face detection off.
When the shooting mode is set to N, face detection & tracking will automatically be set to [i On }]
and cannot be changed.
In certain cases, faces may not be detected correctly. Typical examples include:
- Faces extremely small, large, dark or bright in relation to the overall picture.
- Faces that are turned to the side, upside-down, at a diagonal or partially hidden.
Face detection cannot be used in the following cases:
- When the shutter speed used is slower than 1/30 (1/24 if the frame rate set in [
3 Recording Setup] > [1]
> [4K Recording] or [HD Recording] is 23.98P).
- When the shooting mode is set to ƒ and [ Night Scene], [ Low Light] or [ Fireworks] is selected.
- When [Slow & Fast Motion] is set to [x1/4].
- In mode, when drive mode is set to [ AF Continuous].