Filter
Top Products
110
OTHER RECORDING FUNCTIONS
NOTE
• Selecting “Filter 1” records images with the
monochrome, sepia, red, and purple filters.
• Selecting “Filter 2” records images with the green,
blue, yellow, and pink filters.
• Selecting “Portrait” records a normal image, followed
by an image with soft focus and enhanced flesh
tones.
IMPORTANT!
• Note that you can use only one non-configurable
variable at a time. You cannot use them in
combination with each other.
Auto Bracketing Precautions
• Auto bracketing cannot be used when any one of the
following conditions exists.
— When TIFF is selected for the image resolution (page 78)
— When “BULB” is selected for the shutter speed
(pages 95, 96)
— During Coupling Shot, Pre-shot, or Soft Focus
recording (pages 113, 117, 119)
• The flash is disabled while auto bracketing is being used.
• The Triple Self-timer (page 75) cannot be used together
with auto bracketing.
• Take care not to move the camera until all of the shots
(three or five) of the auto bracketing operation are
recorded.
• The camera automatically performs a digital noise
reduction process at shutter speeds slower than 1
second. Because of this, an auto bracketing operation
that normally records five shots records only four shots at
shutter speeds slower than 1 second.
• An auto bracketing operation may stop part way through if
memory capacity or battery power runs low.
• Certain menu settings may be ignored when you use Auto
Bracketing for recording.