Filter
Top Products
147
OTHER RECORDING FUNCTIONS
IMPORTANT!
• The “
2s
” setting is useful when you want to be part
of the image you are recording. The delay gives you
time to look at the camera after operating the remote
controller.
• The remote controller can be used in the PLAY mode
and the Voice Recording mode, regardless of the
Triple Self-timer setting.
Using the Card Remote Controller
Point the signal emitter on the remote controller at the
camera’s signal receiver (front or side), and perform the
operation you want.
Card remote controller button operations are identical to
those of the corresponding camera buttons.
• The range of the card remote controller is normally about
five meters on a straight line between the signal emitter
and front camera signal receiver, and about one meter
from an angle to the right of the front of the camera.
Remote control
signal receivers
Signal emitter