Filter
Top Products
128
OTHER RECORDING FUNCTIONS
Specifying Contrast
Use this procedure to adjust the relative difference
between the light areas and dark areas of the image you
are recording.
1.
In a REC mode, press [MENU].
2.
Select the “Quality” tab, select “Contrast”,
and then press [̈].
3.
Use [̆] and [̄] to select the setting you
want, and then press [SET].
To get this:
High contrast
Normal contrast
Low contrast
Select this setting:
+2
+1
0
–1
–2
Resetting the Camera
Use the following procedure to reset all of the camera’s
settings to their initial defaults as shown under “Menu
Reference” on page 231.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “Reset”, and
then press [̈].
3.
Use [̆] and [̄] to select “Reset”, and then
press [SET].
• To cancel the procedure without resetting, select
“Cancel” and press [SET].