Filter
Top Products
91
OTHER RECORDING FUNCTIONS
Using the Zoom Continuous Shutter
Mode
The zoom continuous shutter mode displays a selection
boundary that you can use to select an area in the monitor
screen. Then when you press the shutter button, the
camera records the monitor screen image and the area
enclosed in the selection boundary, digitally zoomed to
twice its normal size.
1.
In a REC mode, press [ ].
2.
Use [̆] and [̄] to select “
Z
”, and then
press [SET].
• This causes “
Z
” to appear, along with a selection
boundary in the center of the monitor screen.
3.
Use [̆], [̄], [̇], and [̈ ] to move the
selection boundary to the area of the monitor
screen you want, and then press [SET].
4.
Press the shutter button once to record.
• This records two images: the image on the monitor
screen and the image within the selection boundary,
digitally zoomed to twice its normal size.
IMPORTANT!
• Note with the above procedure, you do not need to
keep the shutter button depressed.
• Note that zoom continuous shutter operation is not
available when the image size setting is 3072
×
2048
(3:2) or 640
×
480.
• The size of the digitally processed images is smaller
than the camera’s current image size setting.
Example: When the camera’s current image size
setting is 3072
×
2304 pixels, the size of
the digitally processed images produced
by a zoom continuous shutter operation
will be 1600
×
1200 pixels.
• When Auto Focus is selected as the focus mode, the
metering mode automatically switches to “Spot”
(pages 75, 77) and locates the Auto Focus area in
the center of the Zoom Continuous Shutter selection
boundary.
B