Filter
Top Products
108
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] * “
r
REC MENU” Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
NOTE
• Only camera shake correction can be used during FHD and STD movie recording.
• Anti Shake correction is not supported during High Speed Movie or HDR Art Movie
recording.
• When “On” is selected for “Anti Shake” and “Auto” is selected for “ISO Sensitivity”
(page 51), ISO sensitivity, aperture, and shutter speed will not appear on the
monitor screen when you half-press the shutter button. These values will appear in
the display of the image immediately after it is shot.
• Shooting while “On” is selected can cause an image to appear somewhat coarser
than normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn
off Anti Shake.
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Settings
REC Screen
Icon Display
Description
On Minimizes the effects of hand and subject movement.
Off None Turns off Anti Shake settings.
DEMO
Half-pressing the shutter button demonstrates the
effect of Anti Shake. However, the image is not
recorded.