Filter
Top Products
171
Other Settings (SETTING)
Procedure
[MENU] * “¥ SETTING” Tab * USB
You can use the procedure below to select the USB communication protocol, which is
used when exchanging data with a computer, printer, or other external device.
Procedure
[MENU] * “¥ SETTING” Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
Procedure
[MENU] * “¥ SETTING” Tab * HDMI Output
• See page 127 for details.
Configuring USB Protocol Settings (USB)
Mass Storage
Select this setting when connecting to a computer (pages 149,
154). With this setting, the computer sees the camera as an
external storage device. Use this setting for normal transfer of
images from the camera to a computer.
PictBridge
Select this setting when connecting to a printer that supports
PictBridge (page 141).
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
NTSC Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 4:3 aspect ratio
16:9 Wide screen aspect ratio
Selecting the HDMI Terminal Output Method (HDMI Output)