Filter
Top Products
65
Snapshot Tutorial
5. Use [8], [2], [4], and [6] to reposition the currently selected icon.
6. Press [RING] to select the other icon if you want, and reposition it
using the same operation as step 5.
7. When the icons are located where you want, press [SET].
• You can also use the function ring to reposition an icon.
NOTE
• If you assign “Motion Position” to the “L/R Key” setting of the “r REC MENU”
(page 101), you will be able to reposition the selected icon with the [4] and [6]
keys while in the Handsfree Mode.
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. Align the mode dial with [h] (HDR).
2. Press [SET] and then use [8] and [2] to select the (HDR Level)
Control Panel option, and then press [SET].
3. Use [8] and [2] to select the HDR Level setting you want, and then
press [SET].
• The HDR Level can be set to Level 1, Level 2, or Level 3.
• You can also select the HDR Level by rotating the function ring.
4. Press the shutter button to shoot.
NOTE
• HDR works best when shooting with the camera mounted on a tripod.
• Shooting with this function causes the flash setting to change automatically to
?
(Flash Off).
• Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this function may not be
able to produce the desired result.
Digitally Correcting for Overexposure and Underexposure
(HDR)