Filter
Top Products
117
OTHER RECORDING FUNCTIONS
Select this setting:
Auto
ISO 50
ISO 100
ISO 200
ISO 400
To get this:
Automatic sensitivity selection
Conforms to ISO 50
Conforms to ISO 100
Conforms to ISO 200
Conforms to ISO 400
IMPORTANT!
• Under certain conditions, a high shutter speed in
combination with a high ISO sensitivity setting can
cause digital noise to appear inside of an image. For
clean, good-quality images, use the lowest ISO
sensitivity setting possible.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
NOTE
• You can use key customization (page 123) to
configure the camera so the ISO sensitivity setting
changes whenever you press [̇] and [̈] while in the
REC mode.
Specifying ISO Sensitivity
You can change the ISO sensitivity setting for better
images in places where lighting is dim or when you are
using faster shutter speeds.
• ISO sensitivity is expressed in terms of values that
originally indicated the sensitivity to light for photographic
film. A larger value indicates higher sensitivity, which is
better for recording when available lighting is dim.
1.
In the REC mode, press [MENU].
2.
Select the “REC” tab, select “ISO”, and then
press [̈].
3.
Use [̆] and [̄] to select the setting you want
and then press [SET].