Filter
Top Products
129
OTHER RECORDING FUNCTIONS
2.
Wipe the surfaces of the battery with a soft,
dry cloth, and then place it onto the battery
holder so its positive , side is facing
upwards (so you can see it).
Before Using the Card Remote
Controller for Recording
Be sure to perform the following steps before using the
card remote controller for recording.
1.
In the REC mode, use
[ ] to select the
card remote controller
mode you want to use.
• Enabling the card remote
controller for recording
causes either “ ” or
“
2s
” to appear on the
monitor screen.
: Pressing the remote controller’s shutter button
immediately releases the shutter.
2s
: Pressing the remote controller’s shutter button
releases the shutter about two seconds later
(same as the 2-second self-timer).
Remote controller
operation enabled
3.
Slide the battery holder back into the remote
controller.
IMPORTANT!
• Take care to ensure that the battery is not
accidentally swallowed when it is removed from the
remote controller. Particular care is required where
young children are present.
• Keep button battery out of the reach of small
children. If swallowed accidentally, contact your
physician immediately.