Filter
Top Products
57
BASIC IMAGE RECORDING
5.
After making sure that the
image is focused properly,
press the shutter button the
rest of the way down to
record.
• The number of images that can
be stored in memory depends on
the image size and image quality
setting you are using (page 70).
• Press the shutter button gently to avoid camera
movement.
Shutter button
Recording Precautions
• Never open the battery compartment cover while the
green operation lamp is flashing. Doing so not only
causes the current image to be lost, it can also corrupt
images already stored in file memory and even lead to
malfunction of the camera.
• Never remove the memory card while an image is being
recorded to the memory card.
• Fluorescent lighting actually flickers at a frequency that
cannot be detected by the human eye. When using the
camera indoors under such lighting, you may experience
some brightness or color problems with recorded images.
• When “Auto” is selected for the ISO sensitivity setting
(page 117), the camera automatically adjusts its
sensitivity in accordance with the brightness of the
subject. This can cause some static noise to appear in
images of relatively dark subjects.
• When recording a dimly lit subject while “Auto” is selected
for the ISO sensitivity setting (page 117), the camera
increases sensitivity and uses a slower shutter speed.
Because of this, you need to guard against camera
movement if you have flash turned off (page 64).
• If unwanted light is shining on the lens, shade the lens
with your hand when recording the image.