Filter
Top Products
59
BASIC IMAGE RECORDING
Previewing the Last Image Recorded
Use the following procedure to preview the last image
recorded, without leaving the current REC mode.
1.
Press [PREVIEW] to
display the last image
recorded.
• Pressing [PREVIEW] again
returns to the REC mode
screen.
• No preview image will appear if you press
[PREVIEW] after changing the mode dial setting, or
immediately after you turn on the camera.
• Image preview cannot be used in the Movie Mode.
The preview image is cleared automatically
whenever the REC mode is changed.
Deleting an Image on the Preview Screen
You can use the preview screen to delete the last image
you recorded.
IMPORTANT!
• Note that the image delete operation cannot be
undone. Make sure you really do not need an image
before you delete it.
1.
In the REC mode, press [PREVIEW] to display
the last image you recorded.
2.
Press [EX ].
3.
In response to the confirmation message that
appears, use [̆] and [̄] to select “Delete”.
• Select “Cancel” to cancel the delete operation
without deleting anything.
4.
Press [SET].
• This deletes the image and returns to the REC mode
screen.
[PREVIEW]