Filter
Top Products
User’s Manual
29
• RESET
Select this option to reset all camera parameters in the SETUP menus to the
factory defaults.
• EXIT
Exit SETUP MENU1 and go back to the MAIN MENU.
3.3.9 SETUP MENU2 (18×/26× Model Only)
The Aperture and Mask Display settings can be configured under SETUP MENU2.
• APERTURE
In this setup menu, the user can adjust the enhancement of the edges of
objects in the picture. There are 16 adjustment levels; the options are <01> ~
<16>, where <01> represents “no enhancement”. When shooting text, this
function may help to make it sharper.
• MASK DISPLAY
This option allows the user to set when the privacy mask is displayed to
prevent any intrusive monitoring. If the preset point function or the sequence
function is activated, the difference between the two display modes will be
obvious.
FIRST
If this display mode is selected and preset or sequence functions are activated,
the camera will detect and display the masks set in the next area first and the
PTZ camera will then rotate to the next preset point.
LAST
If this display mode is selected and preset or sequence functions are activated,
the PTZ camera will move to the next preset point zone then detect and
display the mask set for that zone.
NOTE: It is recommended that the privacy mask be set for 1× optical
zoom and a sequence speed value higher than 10.
3.3.10 TITLE DISPLAY
The user can name a certain view area and display its title for easy recognition. In
this option, the user can choose whether or not to display the titles set in advance.
SETUP MENU2
APERTURE 01
MASK DISPLAY FIRST