Filter
Top Products
User’s Manual
30
• ON
A title set for a certain view will be displayed when the PTZ camera returns to
that view area.
• OFF
If TITLE DISPLAY is set to <OFF>, no title will be displayed on the screen
even if titles have been set.
3.3.11 TITLE SETTING
Up to 16 zone titles can be set with a maximum 20 characters for each title; two
mask zones can be set for a view area. The user can name the zone titles with
privacy mask ID numbers for future recognition.
NOTE: On the 23× model, the available area for setting the privacy mask is
restricted to a tilt angle of 45°.
Follow the steps below to set a camera title.
STEP 1: Move the PTZ camera to a particular view area for which you want to set a
title.
STEP 2: Turn on OSD and select <TITLE SETTING>.
STEP 3: Select a number to indicate the view area.
STEP 4: Press <ENTER> to go into editing mode.
TITLE SETTING: 01
0 1 2 3456789 EXIT
A B C D E F G H I J SAVE
K L M N O P Q R S T LEFT
U V W X Y Z : / . , RIGHT
[ ] + ? - DELETE
TITLE:
ABC
STEP 5: Choose a character using the direction keys and then press <ENTER> to
input that character. Example: <A > <ENTER>, <B> <ENTER>, <C>
<ENTER>
TITLE: ABC
STEP 6: To delete characters entered, move the cursor <LEFT> or <RIGHT> and
press <ENTER> to select a character in the entry field, then move the cursor
to <DELETE> and press <ENTER> to delete the selected character.
STEP7: Once the setting is complete, move the cursor to <SAVE> and press
<ENTER> to save.