Filter
Top Products
User’s Manual
43
The original centre of the mask zone is the centre of the screen. The user can
move the centre of the mask zone to another position by adjusting this value
by pressing the LEFT/RIGHT keys.
V CENTRE (000~256)
The original centre of the mask zone is the centre of the screen. The user can
move the centre of the mask zone to another position by adjusting this value
by pressing the LEFT/RIGHT keys.
H SIZE (000~127)
This option allows the user to adjust the horizontal size of the privacy mask.
Setting the H and V size to 0 deletes the selected mask.
V SIZE (000~127)
This option allows the user to adjust the vertical size of the privacy mask.
Setting the H and V size to 0 deletes the selected mask.
• MASK CLEAR+RESET
This option is used to clear the mask settings for the selected privacy mask.
Use the LEFT/RIGHT direction keys to select a mask and then press
<ENTER> to erase the configuration.
• MASK DISPLAY
This option is used to set when the privacy mask is to be displayed.
FIRST
If you select this mode, the camera will detect the mask zone for the next
preset position and display the mask in advance, then pan to the preset point.
LAST
If you select this mode, the camera will move to the preset point, then display
the mask zone.
NOTE: On the 23x model, the available area for setting the privacy
mask is restricted to a tilt angle of 45° and two mask zones are
permitted in a view area.
• EXIT
Exit this page.