Filter
Top Products
User’s Manual
33
• HOME FUNCTION
This option is used to enable or disable the HOME function. Use the left/right
direction keys on the control keyboard to change the setting.
• SELECT MODE
Select a mode that you want the PTZ camera to execute when the HOME
function is enabled and the RETURN TIME has expired. The options are
<AUTOPAN>, <SEQUENCE>, <CRUISE> and <PRESET>. Use the right
direction key on the control keyboard to change the setting and the following
items will change to correspond to your selection.
• PRESET
Select a preset point for the PTZ camera to move to when an alarm pin is
triggered.
SEQUENCE
Select a sequence line for the PTZ camera to execute when an alarm pin is
triggered. The sequence line should have previously been defined in the
SEQUENCE setup menu.
AUTOPAN
Select an auto-pan line for the PTZ camera to execute when an alarm pin is
triggered. The auto-pan line can be defined in the AUTOPAN setup menu.
CRUISE
Select a cruise line for the PTZ camera to execute when an alarm pin is
triggered. The cruise line can be defined in the CRUISE setup menu.
• RETURN TIME
The PTZ camera starts to count down the RETURN TIME when the PTZ
camera is idle, and will execute the function set under SELECT MODE if the
return time expires. The RETURN TIME range is from 1 to 128 minutes.
• GO
If the HOME function is enabled, the user can also execute the HOME
function manually by selecting this option.
HOME SETTING
HOME FUNCTION OFF
SELECT MODE PRESE
T
PRESET POINT 001
RETURN TIME 001
GO ENTER
EXIT YES