Filter
Top Products
User’s Manual
37
• RUN AUTOPAN
Once the setting is complete, select this option to manually execute the
auto-pan function.
• EXIT
Exit the AUTOPAN menu.
3.3.16 CRUISE
A cruise is a sequence of manual operations that can be stored and then called up to
be executed repeatedly. It can be made up of pan, tilt position and zoom parameters
(zoom setting only on 18
×/26× model).
• RECORD START
Follow the description to record the CRUISE path.
1. Rotate the PTZ camera to the desired view area and press <ENTER> to
create the cruise path using the joystick on the control unit. The
percentage of the memory buffer used will be displayed on the screen.
2. Pan and tilt the PTZ camera to create a path. The zoom setting is only
available on the 18
×/26× model.
NOTE: Pay attention to the memory size when creating the cruise
path. Once the buffer percentage reaches 100%, recording of the
path will stop.
• RECORD END
The cursor will move to RECORD END while you are creating the cruise line;
when the setting is complete, press <ENTER> to save the path.
• RUN CRUISE
Once the setting is complete, select this option to manually execute the cruise
function.
• EXIT
Exit the CRUISE menu.
CRUISE
RECORD START ENTER
RECORD END ENTER
RUN CRUISE ENTER
EXIT YES