Filter
Top Products
APN – Access Point Name is a name provided by the cellular service that allows the camera to
gain access to the Internet via their network. Contact your cellular service provider for the correct
value to enter here.
PIN – Some SIM cards require a 4-8 digit ‘personal identification number’. The cellular service
provider will supply this number if it is required. If a PIN is not required, leave this field blank.
OBSERVER IV
Operating Mode
Image Delivery - The camera can deliver images to the internet via either Email or File
Transfer Protocol (FTP). Select the desired delivery option and make sure to enter the
corresponding Internet parameters on the
Network Settings page.
Email delivery FTP delivery
Activation - Every time the camera is activated it will send an image. The camera will
always be activated by a signal on the external trigger line. It can also be activated
internally via a user defined schedule. To enable scheduled operation click on the box
below and go to the
Schedule page to define those times.
Enable Schedule
Notification - The camera can provide a notification message each time it is activated via
the external trigger. The notification message can be either an Email or a Short Message
Service (SMS) to a cell phone. Select the mode of delivery for this message below. Only
SMS notification is available if the Image Delivery option, above, has been set to Email.
Go to the
Network Settings page and enter the appropriate Email or SMS parameters as
needed.
None SMS Email Email with image
Continuous Mode - Continuous mode can be entered at startup by enabling below and
setting switch #1 in the up position. Enter a delay, in minutes, between pictures (1-99).
Enable at startup. Wait
1
minutes between images
Submit Reset
This page determines how and when the Observer delivers an image and trigger notification.
Image Delivery – Select either Email or FTP delivery of images. All images from the camera
will be delivered in this manner.
9