Filter
Top Products
18
6.
Choose 255.255.255.224 from the Mask drop-down menu.
7. Select the DMZ interface from the Translate Address on Interface drop-down menu.
8. Click Dynamic in the Translate Address To section.
9. Choose 200 from the Address Pools drop-down menu for the Pool ID.
10. Click OK.
11. A dialog box appears asking if you want to proceed. Click Proceed.
12. On the NAT Translation Rules page, check the displayed configuration for accuracy.
13. Click Apply to complete the adaptive security appliance configuration changes.
The displayed configuration should be similar to the following: